Skip to main content

Start O&O BlueCon from the boot medium

note

At least 1 GB RAM is required to start O&O BlueCon from a bootable medium. For stable and optimal performance, 4 GB RAM is recommended.

Creating or Starting the Boot Environment​

Further information on creating the O&O BlueCon boot environment can be found in the section
Creating the O&O BlueCon Boot Environment using O&O BuildPE.

No installation is required to use O&O BlueCon on the target system. The program is started directly from the bootable medium (CD/DVD or USB flash drive). This is particularly necessary when:

  • Windows no longer starts
  • Repairs to the system partition are required
  • Data needs to be backed up or restored
  • Maintenance or analysis tasks must be performed outside the running Windows system

Starting from CD/DVD​

  1. Make sure your computer is configured to boot from CD/DVD.
    The required settings can be configured in the BIOS or UEFI.
    Detailed information is available from your motherboard manufacturer.
  2. Insert the O&O BlueCon boot CD/DVD into the optical drive.
  3. Restart the computer and follow any on-screen instructions to boot from the CD/DVD.
  4. After the boot environment has loaded, the System Settings dialog appears.
    Select the language and region.
  5. Optionally, you can load additional drivers if certain devices are not yet recognized.
  6. After accepting the license agreement, O&O BlueCon will start.

Starting from a USB Flash Drive​

To start O&O BlueCon from a USB flash drive, the device must be selected as the boot medium either in the boot menu or in the BIOS/UEFI.

  1. Open the Boot Menu during system startup
    (e.g., using F8, F11, F12, or ESC, depending on the manufacturer).
  2. Set the USB flash drive (often listed as Removable Devices or USB Device) as the first boot option.
  3. Confirm the selection. The computer will now start O&O BlueCon directly from the USB flash drive.
note

Tip: On newer systems with Secure Boot enabled, it may be necessary to temporarily disable Secure Boot.

Starting Programs from O&O BlueCon​

After starting O&O BlueCon, you will be prompted to accept the license agreement. You can then configure basic system settings. In most cases, no changes are required, as O&O BlueCon automatically selects optimal settings for the detected system.

All integrated programs are available via the Start Menu, including tools for:

  • System recovery
  • Administration and diagnostics
  • Data security
  • Data recovery

The online help can be accessed at any time via Start / Help and Support.

Exiting O&O BlueCon​

To properly exit O&O BlueCon, click Start and choose one of the following options:

  • Restart – O&O BlueCon is closed and the computer is restarted
  • Shut down – O&O BlueCon is closed and the computer is powered off

After exiting, the boot medium can be safely removed.