Control Panel
Using the system settings, parameters such as screen resolution, language and keyboard settings, and time zone can be configured. In addition, the network can be enabled and the operating system can be selected. The latter is especially important if multiple operating system installations exist on the target computer. This selection determines which system databases are addressed. All tools that display system-dependent information automatically access the selected system. Changing the target system or enabling the network afterward is possible at any time during runtime via the Control Panel.
To open the system settings, click Start / Settings and then Control Panel.
Loading Drivers​
If a device—such as a hard drive or a network adapter—is not automatically detected when using the boot CD under Windows PE, the required controller driver may be missing (for example, in the case of RAID controllers).
Drivers can be loaded immediately after starting the boot CD in the O&O System Settings dialog under the Drivers tab. This dialog can also be accessed later via Start / O&O System Settings / Drivers.
To load a driver, proceed as follows:
- Open the Drivers tab in the O&O System Settings dialog as described above.
- All devices detected by Windows as well as devices without an installed driver are displayed. Select the device for which you want to load a driver.
- Click Load.
- Select the driver, for example from one of the connected hard drives, USB flash drives, or a manufacturer CD.
- In the Open dialog, confirm to install the driver.
- Finally, a program message will inform you about the progress of the installation.
You can remove the boot CD from the drive in order to insert a manufacturer’s driver CD.
After loading an additional driver under Windows PE, a restart prompt may appear. This message is automatically generated by Windows PE and is irrelevant when booting from CD. Please decline the restart request and follow the further instructions in the dialog window.
Encrypted drives are not supported under Windows PE, with the exception of BitLocker-encrypted drives.