Skip to main content

System requirements

  • The system requirement of each operating system have to be fulfilled
  • 50 MB free hard disk space
  • 32/64-bit Support (from Windows Vista/Server 2003)
  • Windows® Vista till Windows® Server 2012 R2 (all editions):

Supported operating systems

Operating systemProfessional EditionWorkstation EditionServer Edition
Windows 10yesyesyes
Windows 8yesyesyes
Windows 7yesyesyes
Windows Server 2008nonoyes*
Windows Vistayesyesyes
Windows Server 2003nonoyes*
Windows Server 2008 R2nonoyes*
Windows Server 2012nonoyes*
Windows Server 2012 R2nonoyes*

* All variants of this server operating system are supported, except Core-Installations

If you wish to use the network functionality, you must also have the following available:

  • Network card and connection

Access permissions

You need local administrator permissions for the installation and for its later use. This is usually the case, if you were able to install other programs before.

In a network, you must be the domain administrator if you wish to install and control O&O Defrag locally as well as on the network computers.

Microsoft Windows Installer

The installation takes place with the help of the Microsoft Windows Installer. It is a Windows integrated component which controls all installation and uninstallation.

Supported hardware​

O&O Defrag supports all hardware components that are supported by Windows. Please note the software requirements of the corresponding manufacturer.

As a rule: if you can access your hardware with Windows as you would a normal Windows partition, and this partition is formatted using a supported file system, this hardware can be defragmented. Removable drives such as streamers or CD-RWs are exceptions, since defragmenting them might not be useful. You can also set network drives as target for defragmentation.

RAID​

Striped-, Mirrored- and RAID5-Volumes: The advantage of these drive types lies in their superior speed, which on the one side facilitates accessing and storing processes, and on the other hand offer a higher degree of data security.

O&O Defrag supports all known RAID systems. According to many hardware manufacturers, defragmenting RAID systems is especially important: as their files are spread over several hard disks, their fragmentation level is likely to be very high.

Supported file systems​

O&O Defrag supports all Windows file systems. The following paragraphs will tell you more about each of these file systems.

File SystemExplanation
exFATStarting from Windows Vista, the exFAT-file system is supported. This was designed especially by Microsoft in regard to flash drives, and delivers better performance than FAT. It is also much better against structural damage to the file system and protected against data loss.
FATFAT is the oldest data system, the roots of which go back to MS DOS. It is supported by Windows. O&O Defrag can be used without any problem on FAT drives.
FAT32FAT32 is the native file system of Windows 95b/98/Me. It offers some advantages compared to the older FAT. FAT32 drives are Windows- supported by default and can be defragmented without any problem using O&O Defrag.
NTFSThe NT file system was developed completely new for the Windows NT family. It offers the option of security restrictions on the file level, increases the security against data errors, and achieves higher performance. It is supported by Windows. And O&O Defrag gets optimal results when defragmenting NTFS drives.
EFSA file system introduced with Windows 2000 which is based on NTFS and its encryption ensures higher data security against abuse or unauthorized access. The Encrypted File System (EFS) makes data for unauthorized users unreadable. O&O Defrag supports EFS hard disks; neither data integrity nor data security is compromized.