Skip to main content

Analyze your drives

By analyzing your hard disks, you will get an overview of how files are arranged on a drive and how fragmented they are.
Once the analysis is complete, O&O Defrag generates a detailed status report that also shows the degree of fragmentation.

This degree can range from 0% to 100%:

  • A low value (ideally 0%) means your files are optimally arranged.
  • A high value (close to 100%) is the worst case: files are almost completely fragmented.
  • Values above 15% already lead to noticeable performance losses, so defragmentation is strongly recommended.

Degree of Fragmentation – Explanation and Recommendations​

DegreeExplanation and Recommendations
< 2%Almost all files are optimally arranged. Ideal state – only achievable through regular defragmentation.
2% – 5%Still acceptable on system drives. Performance nearly optimal.
6% – 10%Acceptable on pure data drives, but noticeably slower access compared to the ideal state.
11% – 20%System becomes noticeably slower. Regular defragmentation and use of scheduling recommended.
Over 20%Very high fragmentation with significant performance losses. Immediate defragmentation required, followed by regular monitoring and comparison of the fragmentation level.

Starting an Analysis​

  1. In the drive list, select the desired drive.
  2. Start the analysis via the ribbon menu or the context menu.
  3. Depending on the drive size, the analysis may take some time.
    • Progress is shown on the drive icon and in the progress bar.

After completion, you can open a status report as an HTML document in your web browser.

note

You can also analyze multiple drives at the same time. To do this, hold down the Ctrl key and select the desired drives.