Defragmentation and S.M.A.R.T.
O&O Defrag provides various information views to monitor the progress and results of your defragmentation.
Use the tabs at the bottom of the Defragmentation ribbon to switch between the following categories:
Timeline
- Overview of actions you have performed recently.
- Shows defragmentation results per drive.
History
- Shows how many files were sped up and how many fragments were removed.
- Overview of the total amount of data defragmented.
Drive status
- Summary of the status of selected drives before and after defragmentation.
- Includes information about:
- Drive details
- Drive usage
- File system
- A dynamic pie chart displays the current fragmentation level proportionally.
- Also includes:
- Total and analyzed number of files and folders
- Dynamic updates during defragmentation
File status
- Overview of the largest and most fragmented files.
- This information is also included in the status reports.
- Sorting options by different criteria (e.g., file size, fragmentation level).
- Requirement: The drive must be analyzed beforehand.
Notes on the first defragmentation
- The first defragmentation usually takes the longest.
- Reason: O&O Defrag must examine and optimally position all files.
- The COMPLETE methods are particularly time-consuming because they move non-fragmented files as well.
- Recommendation:
- Perform the first defragmentation using the STEALTH or SPACE method → quick consolidation.
- Then optionally use the COMPLETE methods for maximum performance.
note
No matter which method you choose, your system will be noticeably faster after the first defragmentation.
S.M.A.R.T. functionality
O&O Defrag uses the S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) built into drives to monitor the health of your drives.
- Reads key drive attributes (e.g., power-on hours, error rates).
- Changes in these values indicate wear or impending issues.
- The view shows details such as:
- Power cycles
- Temperature
- Read errors
- Write operations
- Each value is displayed on a scale (raw value) from 0 to 100, 200, or 255.
Typical SSD attributes
| Name | Description |
|---|---|
| Temperature | Temperature in °C (normal 40–65 °C). The lower, the better. |
| Power-on hours | Total operating time in hours. |
| Power cycles | Number of power on/off cycles. |
| Interface / transfer mode | Interface through which the SSD is connected. |
| Read/Write operations | Total number of read and write operations. |
| Block size | Indicates the SSD’s block size. |
| Critical warning | Number of critical error messages. |
| Available spare | Remaining spare capacity. |
| Wear percentage | SSD wear level. |
| Data units read/written | Number of processed data units. |
| Executed read/write commands | Details on command usage. |
| Command wait time (min) | Average wait time in minutes. |
| Unsafe shutdowns | Number of improper shutdowns. |
| Integrity errors | Number of detected integrity issues. |
| Error log entries | Number of stored error logs. |
Typical HDD attributes
| Name | Description |
|---|---|
| Temperature | Temperature in °C (normal 40–65 °C). The lower, the better. |
| Power-on hours | Total operating time in hours. |
| Power cycles | Number of power on/off cycles. |
| Interface / transfer mode | Interface through which the HDD is connected. |
| Read error rate | Uncorrectable read errors → may indicate surface issues. |
| Average spin-up time | Number of attempts to reach rated speed → indicates motor problems. |
| Start/stop cycles | Number of load cycles during start/stop. |
| Reallocated sectors | Number of used spare sectors → decreasing reserves = increasing risk. |
| Seek error rate | Read/write errors due to head movement. |
| Spin-up retries | Problems when the disk spins up. |
| Recalibration retries | Frequent recalibrations indicate wear. |
| Power-off retract count | Improperly completed shutdowns. |
| Head parking events | Number of head parking operations. |
| Used spare sectors | Number of already used spare sectors. |
| Remaining spare sectors | Number of not yet assigned spare sectors. |
| Uncorrectable sectors | Direct indication of impending data loss. |
| Interface CRC errors | Number of faulty transfers. |
| Write errors | Number of uncorrectable write errors. |
note
If S.M.A.R.T. values look suspicious, make sure to back up your data in time. Critical warnings or increasing errors are a sign of imminent failure.