Settings
To optimally tailor O&O Defrag to your use case, you can configure various settings.
These options determine the program’s behavior during analysis and defragmentation.
Open the settings via the ribbon menu and click on All Settings.
General Settings
The General Settings control O&O Defrag’s behavior during analysis and defragmentation.
You can find these options under All Settings → General in the ribbon menu.
Check drives before defragmentation (chkdsk)
- Before each defragmentation, the integrity of the drives is checked.
- Equivalent to Windows’ integrated chkdsk function, but without automatic error correction.
- If errors are detected, defragmentation is aborted for security reasons.
- Affected drives are marked with a yellow warning triangle.
Errors must be fixed manually using the Windows chkdsk command.
Defragment multiple physical disks in parallel
- Parallel: Drives on different disks are defragmented simultaneously.
- Advantage: shorter overall duration.
- Disadvantage: higher system load.
- Sequential: Drives are defragmented one after the other in alphabetical order.
- Advantage: lower load.
Take system file layout into account
- Uses Windows’ Layout.ini file to optimally arrange startup files.
- Results in a faster system startup.
Advanced Options
-
Include removable drives
Allows defragmentation of removable media (e.g., ZIP, Jaz, MO). -
Include external drives
Allows defragmentation of externally connected drives (USB, FireWire). -
Show defragmentation result
By default shows a before/after block view and history. Can be disabled. -
Protect SSDs from defragmentation
Protects SSDs from unnecessary write cycles. Defragmentation of SSDs is not meaningful (see chapter Handling SSDs). -
Divide into speed zones
Divides files into zones based on access speed (see chapter Speed Zones).
Disabled by default. -
Disable automatic optimization
Disables background optimization. -
Allow remote access from the same network
Allows O&O Defrag to be controlled remotely by other users in the same network.
Firewall settings are automatically adjusted.
→ See chapter Working in a Network.
Reports and Event Logging
- Create status reports in HTML format (max. 999 reports).
- Optional: log all actions in the Windows Event Log.
- Detail levels:
- Level 1 = errors only
- Level 4 = all information
- Warning: Excessive entries may overwrite other system or program logs.
Tray Icon Settings
-
Show O&O Defrag icon in the notification area
Enable or disable the icon in the taskbar notification area.
Change only takes effect after logging in again. -
Extended control for the logged-in user
- Enabled: user may pause or stop defragmentations.
- Disabled: user only sees the status without being able to intervene.
Automatic Defragmentation
The automatic defragmentation relieves you of manual planning.
Once activated, it works in the background without affecting computer performance.
This benefits both administrators under time pressure and home users unfamiliar with defragmentation, ensuring consistently optimal system performance.
If desired, you can adapt the default settings to your individual needs.
Automatic defragmentation is only started on internal hard drives – not on external storage devices. This prevents data loss if a medium is removed during defragmentation.
Automatic Defragmentation Settings
- All write accesses and new files are monitored.
- New fragmented files are automatically defragmented once they are no longer in use.
- Regular resource-saving passes optimize all files to minimize existing fragmentation.
Examples of heavily used files:
- Windows registry database
- Data containers of download programs
- Temporary internet cache files
These are also regularly defragmented by automatic optimization.
Configuration Options
- Choose between fast and thorough defragmentation for hard drives.
- Further details on the methods can be found in the chapter Traditional Defragmentation Methods.
Notes on Automatic Defragmentation
- Very large files (e.g., virtual machine containers) can slow down system performance if frequently defragmented.
→ Such files should be excluded under Settings → Files before defragmentation. - External USB and FireWire drives are never defragmented automatically.
Reason: unexpected removal of the medium could cause data loss.
Files
In the Files section of the settings dialog, you can specify which files and folders should be excluded from or explicitly included in defragmentation.
This allows O&O Defrag’s behavior to be tailored precisely to your needs.
Select files for defragmentation
- You can exclude entire folders while still including individual files from them.
- You can also define that very large files should not be defragmented or moved for time-saving reasons.
Exclude files
- Click Select files.
- In the dialog, mark the desired files or directories in the Explorer view.
- Click Add.
- Optionally add more files or folders.
- Confirm with Apply.
→ All specified files/folders will be excluded from future defragmentation.
Explicitly include files
- Click Select files.
- Mark the desired files or folders.
- Click Add.
- Optionally add more entries.
- Confirm with Apply.
→ These files will always be defragmented – even if a higher-level rule would exclude them.
By size
- Optionally, very large files can be excluded from defragmentation.
- Define a size threshold.
- Files exceeding this size will neither be defragmented nor moved.
Excluding very large files may shorten runtime but can also leave certain areas of your drive fragmented.
O&O ActivityMonitor
The O&O ActivityMonitor monitors system load and controls when and how intensively O&O Defrag is allowed to use resources.
This ensures that defragmentation runs in the background without disrupting your work.
Default settings are optimal for most systems. If needed, you can fine-tune the options.
The settings apply to both recurring jobs and automatically running defragmentations (see Automatic Defragmentation). In the task dialog, you can also define specific settings for individual tasks.
Load
- Limit how much O&O Defrag may use the CPU during defragmentation.
- Specify that no automatic defragmentation should start if:
- the target drive is heavily used, or
- other programs have high CPU demand.
Program List
- Define programs during whose runtime no defragmentation should occur.
- Typical examples:
- Backup programs
- Antivirus scanners
- Games
Power
- Particularly useful for notebooks:
- Start defragmentation only when running on AC power.
- Enable the option Pause when computer switches to battery power.
This setting extends battery life and prevents performance issues when running on battery.