Skip to main content

Extras

Check drive​

Using the ribbon, you can check your drives for errors with the Check drive command.

  • The related report is automatically saved under Scheduling → Reports.
  • The check corresponds to Windows’ chkdsk function, but runs in read-only mode.
    • No errors are fixed automatically.
    • You must correct errors manually using the Windows chkdsk command.

If an error is detected, we recommend a thorough check of the drive.
You can cancel the check at any time using the Stop button.

note

Because the check runs in read-only mode, your data is not modified by the process.

O&O ClusterInspector​

O&O ClusterInspector is a tool for detailed analysis of disk allocation.

  • Open it with a double-click on a block in the block view.
  • It shows the files located in that area of the disk.
  • By default, up to 50 file entries per page are displayed. You can view more entries using the navigation buttons.

Displayed information:

  • Start cluster: Start of the currently displayed section
  • Number of clusters: Number of clusters occupied by the file in the block
  • Fragments: Number of file parts — greater than 1 indicates fragmentation
  • Size: Physically occupied storage space
  • File: Absolute path of the file
tip

A cluster is the smallest logical allocation unit for files on a storage device.

Show file layout (Details)​

  • Click Details to view information about a selected file.
  • All fragments with cluster number and size are displayed.
  • In the block view (ClusterView), occupied clusters are highlighted.
  • You can immediately see how fragmented a file is and where its fragments are located.

Determine file position​

  • Via the ribbon: Determine file position.
  • Select the desired file in the dialog.
  • In the block view (ClusterView), all areas occupied by the file are highlighted.
  • This provides a quick overview of how the file is physically distributed on the disk.

Optimize Thin Provisioning​

Thin Provisioning is a technique for virtual machines that assigns storage dynamically.
Goal: More efficient use of resources, reduced power consumption, smaller footprint, and less heat generation.

  • O&O Defrag supports Thin Provisioning by reporting changed storage demand (especially reduced demand) to the virtual machine.
  • Benefit: Allocation can be reduced → future storage requirements decrease.

Import/Export base settings​

O&O Defrag allows you to export and import your custom base configuration via .xml files.

Export:

  1. In the main window, under Extras, click Export….
  2. Enter a file name (e.g., ood_settings.xml).
  3. Choose a save location in the file browser and confirm.

Import:

  1. In the main window, under Extras, click Import….
  2. Select the desired configuration file.
  3. Confirm your selection.
note

Make sure the configuration file is complete and compatible before importing.