Skip to main content

Work within the network

The network feature allows you to remotely control O&O Defrag on another computer within the same network.
This lets you run all program functions you use locally remotely as well.

Requirements​

  • O&O Defrag must be installed on the target computer.
  • Port 50300 must be open in the target system’s firewall.
  • By default, you can only control O&O Defrag on computers where your user account is a member of the local Administrators group.

Optional:

  • If you want to allow all users on the network to control it, enable the option in Settings:
    “Allow remote access from the same network.”

Establish a connection​

  1. In the Extras menu, select Connect to computers.
  2. Choose the desired network computer.
  3. Once connected, you have access to all O&O Defrag features as if you were working directly on the target machine.

Firewall settings​

To ensure the connection works, configure the firewall correctly:

  1. Open Windows Firewall at:
    Control Panel → Security → Windows Firewall → Advanced settings → Exceptions.
  2. Create a new port.
  3. Enter port number 50300 and name it, e.g., O&O Defrag.
  4. Confirm the changes.
  5. Check the O&O Defrag box in the exceptions list.
note

Incorrect firewall configuration can block remote control. Ensure that port 50300 is open on all involved computers.