Skip to main content

Reports

O&O Defrag manages all reports in the Report view.
You can find this in the Scheduling section by switching to the Reports tab at the bottom of the user interface.

When the option for report generation is enabled, all analysis and optimization operations are automatically recorded.
Reports are clearly organized by date and recency and grouped into directories.
In parentheses, you can see for which drives and for which tasks a report was created.

Reports contain all relevant information about a drive’s data set, as well as:

  • General information about the drive and file system
  • Details of the performed defragmentation and its results
  • Lists of fragmented or particularly large files that may negatively impact system performance

Reports are generated as HTML documents and can be viewed with any common web browser.
Double-click a report to open it.

Generate reports​

  • Reports are automatically created after each analysis and each defragmentation.
  • Requirement: the option Create reports is enabled under Settings → General.
  • O&O Defrag stores a maximum of 999 reports per computer. After that, older ones are automatically overwritten.

Manual creation:

  1. Select the desired drive in the drive list.
  2. In the ribbon menu, click Create.
  3. An analysis is started (indicated by the drive icon and progress bar).
  4. After completion, the report is saved and displayed automatically.
note

You can also generate reports for multiple drives simultaneously. To do so, hold down the Ctrl key and select the desired drives.

Evaluate reports​

  • Reports document the course of fragmentation and the results of defragmentations.
  • Degree of fragmentation:
    • Normalized value between 0% (optimal) and 100% (heavily fragmented).
    • A value below 5% is desirable.
    • Can also be used as a threshold for starting a scheduled defragmentation.

Delete reports​

  • Individual reports: Select and remove them via the ribbon menu (Delete).
  • Report groups: e.g., “Last month” – deletes all reports from that period.
  • All reports: Remove all saved reports using the Delete All function.