Drive backup
Drive backup creates an image of one or more drives, or of the entire computer. Use it for the system backup and for the regular protection of data drives.
Back up individual drives
- Select Drive backup on the start page.
- In the drive list, enable the checkbox of each drive to back up. The DiskView shows the disks graphically with their partition layout and their free and used space; a click on a drive selects it.
- Optionally open Backup options to adjust the settings, or add the backup as a recurring task with Add as task.
- Select Start drive backup.
- Specify the target path: the suggested default path, or a storage location of your own. The default path is set in the program settings.
- Keep the backup name derived from the creation date, or enter your own. All information about the backup is stored with it and can be read later.
- Select Start.
If the target medium runs out of space, O&O DiskImage asks for an additional target path during the backup.
Backing up the system drive and the data drives separately keeps the backups small and lets you restore a data drive without resetting the whole system.
Back up the entire computer (1-Click backup)
The 1-Click backup creates a complete image of the computer: operating system, installed programs, settings and user data. Compression with LZNT1 and the method Backup of used sectors are preset, so no configuration is needed. Store it on an external drive or a network share.
- Select Drive backup on the start page.
- Select Backup entire computer (in some views: Back up everything).
- Check the suggested target path; the [...] button opens a folder dialog.
- Keep the backup name derived from the creation date, or enter your own.
- Select Start.
A full system backup takes some time, depending on the size of the disks and the speed of the target medium.
Backup options
Backup options holds the settings of the backup you are creating:
| Option | Meaning |
|---|---|
| Backup method | Used sectors (standard), forensic or direct forensic. See Backup types. |
| Backup of changes | Creates an incremental or differential backup on the basis of an existing backup. See Backup of changes. |
| Compression | Reduces the size of the backup file. |
| Encryption | Protects the backup with a password. |
| Lock drive | Locks the source drive during the backup, so no changes are made to it. Without the lock, a snapshot keeps the backup consistent. See Clone drives for the details of locking. |
| Verify backup file for errors after creation | Validates the finished backup immediately. See Backup information and validation. |
The defaults for new drive backups – preferred USB targets, automatic validation, overwriting without prompt – are set under Program settings > Drive Backup. See Program settings.
Profiles
Backup options can be saved as a profile and reused. Under the options, choose the Current profile – Standard or User-defined – save the current settings with Save as... under a name of your own, and edit or delete profiles with Manage profiles. The same applies to restore and copy options.
Recurring backups
To run a backup regularly, add it as a task: select the drives, adjust the options and select Add as task. The task assistant sets the schedule, the user account, the notification and the storage location. See Tasks.
Next steps
- Backup of changes – back up only what changed.
- Restore drives – restore the image.