Skip to main content

Boot medium and O&O DiskImage ToGo

A bootable medium starts the computer when Windows no longer boots and runs O&O DiskImage from a Windows PE environment with all of its functions, so backups can be restored from external storage or from the RecoveryPartition independently of the installed system. Create it while the system still works.

Create a boot medium​

  1. Open Tools > Create Boot Medium.
  2. O&O DiskImage analyzes which creation methods are available: available options carry a green check mark, unavailable ones a cross. The most suitable Windows PE base is selected automatically; Change selects another one.
  3. Choose the target: a CD/DVD burner, a USB stick or removable drive, or an ISO file for later burning or for virtual environments.
  4. Select Create.
The target medium is erased

All data on the target medium is deleted during the creation. Because of a Windows limitation, at most 2 TB of the target drive are used; the rest stays unused.

Recreate the medium after major Windows updates or an upgrade of O&O DiskImage, so it contains current drivers and components. The medium can also be created from the command line; see Command line.

Windows PE base and drivers​

The medium is built on the Windows Recovery Environment or – where that is not sufficient – on the Windows Assessment and Deployment Kit (ADK) or an earlier AIK. In the creation dialog, download opens the Microsoft download page of the ADK/AIK, and package starts a local ADK/AIK installation file. Windows 11 needs the ADK for Windows 11 with the WinPE add-on, Windows 10 the ADK 10.

Custom driver integration adds the drivers of a folder of your choice to the offline operating system of the medium, so storage controllers, network adapters and graphics drivers – including devices that are not Plug and Play – are available as soon as the environment starts. Drivers can also be loaded later in the running environment; see Load drivers.

O&O DiskImage ToGo​

O&O DiskImage ToGo turns an external hard disk or a sufficiently large USB stick into a rescue boot medium and the preferred destination for system backups. As soon as the medium is connected, O&O DiskImage can back up the system onto it; in an emergency, the computer starts from the same medium and restores the stored backup in a few steps.

  1. Connect an external hard disk or USB stick with sufficient capacity.
  2. Select the function for creating a bootable medium.
  3. Select the connected drive as the target.
  4. O&O DiskImage sets up the medium as a boot medium and marks it as the default backup path.

If no storage medium for backups exists yet, ToGo is the recommended solution. The RecoveryPartition offers a similar rescue environment on the internal disk; see RecoveryPartition.

Start from the medium​

From CD/DVD​

  1. Set the computer to boot from the CD/DVD drive in the BIOS/UEFI setup; the documentation of the mainboard manufacturer describes how.
  2. Insert the boot CD and restart the computer. Follow the prompt to boot from the CD.
  3. In the system settings window, select the language and region.
  4. Load additional drivers for devices that Windows PE has not found. See Load drivers.
  5. Accept the license terms. O&O DiskImage starts.

From a USB stick​

  1. Open the boot menu while the computer starts, or change the boot order in the BIOS/UEFI setup.
  2. Move the USB entry (removable devices) to the first position.
  3. The computer starts O&O DiskImage from the stick.

The order chosen in the boot menu usually applies to the current start only. Some computers start a stick only from USB 2.0 ports, not from USB 3.0 ports. If the stick is not detected, recreate the medium – ideally directly with O&O DiskImage.

Notes before booting​

  • Secure Boot may have to be disabled so that the Windows PE medium starts.
  • Start the computer in the same boot mode (UEFI or Legacy/CSM) in which the medium was created.
  • Windows PE often uses the English (US) keyboard layout. Switch the layout in the start dialog before entering passwords or paths.
  • If the backup is on a network share and Windows PE does not recognize the network adapter, load its driver.
  • For BitLocker-protected drives, have the recovery key ready; encrypted volumes can only be used after they have been unlocked. See BitLocker.
  • Drive letters can differ from those in Windows. Identify drives by their name, size and content.

Next steps​