Skip to main content

Restore the entire system

The system partition cannot be overwritten while Windows is running. To restore it, or the entire computer, start O&O DiskImage from the boot medium or from the RecoveryPartition.

Before you start​

  • Create the boot medium while the system still works, or set up the RecoveryPartition. See Boot medium and O&O DiskImage ToGo and RecoveryPartition.
  • Keep the backup with the system partition and all related drives available – on an external medium, a network share or the RecoveryPartition – together with the whole chain of a backup of changes.
  • For a restore to a computer with different hardware, enable M.I.R. during the restore. See Dissimilar hardware (M.I.R.).
  • For BitLocker-encrypted drives, have the recovery key ready. See BitLocker.

Restore the system from the boot medium​

  1. Start the computer from the boot medium, or from the RecoveryPartition. See Start from the medium.
  2. Select Restore on the start page.
  3. Select Restore, or use the browse button to navigate to the backup.
  4. Select the backup file that contains the system partition and the related drives, and select Open.
  5. All drives in the backup are listed. Enable the checkbox of each drive to restore – for a full system restore, all drives.
  6. Select the target drive to which the backup is written.
  7. Select Start drive restoration.
  8. When the restore is complete, restart the computer as usual.
The target is overwritten

Restoring the system partition or the entire system overwrites all data on the target. Check the target carefully: under Windows PE, drive letters can differ from those in Windows – the usual drive C: may appear as drive D:.

After the restore​

  • Restart the computer and check that Windows starts. If a restored or duplicated system does not start, see the causes under Limitations of M.I.R..
  • If the system was restored to another computer or deployed to several computers, change the computer name and the computer SID. See System tools.
  • Recreate the boot medium after major Windows updates or an upgrade of O&O DiskImage, so it contains current drivers and components.

Next steps​

  • Restore drives – individual drives in the running Windows.
  • Load drivers – if a disk or the network is missing in the recovery environment.