Skip to main content

Methods of deletion

O&O SafeErase provides six different deletion methods, each varying in security level and duration of the deletion process:

  1. Highest Security (35 passes):

    • This method is based on the procedure described by Peter Gutmann. It performs 35 defined passes in a random order to ensure maximum security.
  2. High Security (7 passes):

    • Based on the “National Industrial Security Program Operating Manual” (NISPOM) of the U.S. Department of Defense (DoD) from January 1995. It executes seven passes: three passes according to the DoD 5220.22-M (E) standard, followed by a random value and another pass based on DoD 5220.22-M (E).
  3. Medium Security (6 passes):

    • Compliant with the German BSI standard as described in the “BSI IT Baseline Protection Manual.” Data is overwritten with a random value, then its complement, and this process is repeated three times with different random values.
  4. Low Security (3 passes):

    • According to the “National Industrial Security Program Operating Manual” (NISPOM – US DoD 5220.22-M) from January 1995. The data is overwritten in three passes: with a defined value, its complement, and a random value.
  5. Minimal Security (1 pass):

    • A fast method where data is overwritten only once with random values, which already makes recovery unreliable.
  6. Overwrite with zeros:

    • The fastest method, overwriting the data simply with zeros.

Special feature for SSDs:

  • SolidErase for SSDs:
    • A dedicated feature for erasing Solid State Drives (SSDs). It ensures irrecoverable data deletion while minimizing stress on the SSD.

Please note:

  • Higher security levels require more time due to the number of overwrite passes.
  • The displayed deletion time is only an estimate and may vary depending on system load and hardware condition.